Techy Navigation Bar

Create a new document 600×150 with black as your background. Select the “rounded rectangle tool” and draw out a rectangle fill it with the color black also, now add these layer styles.

You should now have something like this.

Now create a new layer above your rectangle then select the pen tool and create a box like this.

Right click and goto make a selection. Then fill with the color white.

Select your rectangle layer whilst holding the “ctrl” key on the keyboard now click your white box layer that you created in the last step. Goto “select > inverse” then hit the “delete” key on the keyboard, you should be left with this.

Add this layer style to your white box and set layer opacity to 65%.

You should now have this.

Select the type tool personilze your navigation with the sections you require. The colors ive used are #ffffff & #d9ff3f.

Select the type tool once again and just type out some dash’s ( ——– ), Now goto “edit > transform > rotate 90 cw” place one of these next to your text.

Now draw a small white box above your text.

Now add a number inside you white box.

Now select the type tool again and whilst holding shift press “¬” key, on my keyboard its under the “esc” key and above the 2tab” key. Add this symbol to the right of your text.

All done.

Pump Up The BASS!

Open up adobe photoshop with the image you want to animate.

Now select the pen tool OR your desired cutting tool and draw around each speaker, i find it best to use the pen tool.

Copy your speakers twice onto a new layer, label them speaker 1 and speaker 2.

Select the speaker 1 layer goto “filter > blur > motion blur” dont blur by more than 10 pixels.

Press ok to apply the blur, repeat this step for layer speaker 2 but only this time CHANGE THE ANGEL of the motion blur. Once you have blurred both speaker layers hide them by clicking on the little eye icon. Now goto “file > edit in image ready”

If its the 1st time using image ready, your animation window may not be open so goto “window” at the top and see if there is a tick next to “animation”. Your layout should look like this, althou ive moved the 3 boxes together as these are the only things we need to use, ive also labelled the icons we will be using so use the below image AS A REFERENCE.

You will already have one frame in the animation window, we need to duplicate this “4” times so click layer one then click the duplicate frame button 4 times. You should now have 5 frames.

Select frame 2 and unhide speaker layer 1.

Click layer 4 and unhide speaker layer 2.

Now on layers 2 and 4 click where it says “0 sec” there should be a little black arrow. On layers 2 and 4 set the delays to 2.0 sec.

Now you can click play at the bottom of the animation window to see what it looks like. Heres how mine looks.

You can adjust the rhyem of the bass by changing the delay time and adding more frames. You could even turn it into a signature.

Christmas Vista Wallpaper tutorial

Before we start this tutorial i suggest you download the tutorial contents file with all the required image needed to complete the tutorial.

Once you have downloaded the above file open up “snowflakes.jpg” and resize to what ever size your wallpaper is intended for, i shall be using a small resolution for the purpose of this tutorial.

Create a circle in the center of your canvas fill with the color #356699, Now click your circle layer whilst holding down ctrl to make a selection. Select your paint brush tool and change the settings to the ones in the picture below. Make sure your brush is 100px SOFT brush.

Now brush at the bottom of the orb. Then brush a single cirlce at the top somewhere.

Now add these layer styles.

Now set layer opacity to 75%. You should now have something like this.

Now create a white cirlce within the orb, add a layer mask and drag a linear gradient over it to blend it in. Duplicate this layer and flip it vertically and place at the bottom of the orb. So now you should have to white circles acting as hightlights. Your image should look like this.

Open up “logo.jpg” and drag the windows logo onto your canvas, with the pen tool or your desired cutting tool remove the background. Resize the logo to fit into the middle of your orb. Then add these layer styles.

Your image should look like this.

Now open up “hat.jpg” and drag to your canvas, again cut the background from the hat with your prefered cutting tool. Once you have removed the background click the layer whilst hold ctrl on the keyboard to make a selection, now goto “select > modify > contract” contract the selection by 1 pixel, then goto “filter > blur > guassian blur” blur by about 3 pixels. Now resize your hat to fit the orb like in the image below.

Now create a black circle underneath your hat to act as a shadow, lower the opacity to suit also blur by about 2 pixels.

Now select a nice looking font and add some text. Add these layer styles to your text.

Thats it all done heres mine.

Web Design Layout #4 Tutorial

Create a new document 800×800, select the colors #2c2d2e & #47474a (or something similar) and drag a linear gradient over your canvas.

Now create a new layer, using some grunge brushes add some grunge.

Set layer opacity to 50% and blending mode to soft light. Now select your background layer and add some noise by going to “filter > disort > noise”.

Now merge both layers together, and goto “filter > render > lighting effects” use the settings below. (sorry about quality of image)

You should now have something like this.

Now select the rounded rectangle tool and make these 3 set of boxes.

Once you have made the boxes set the all the layers opacity to 40% and add these layer styles.

You should now have something like this.

Add your site title and logo.

Still with the text tool add your navigation text and main text.

Now using adobes custom shapes add a selection of small arrows next your navigation text and 2 big small arrows at the very bottom (see picture below).

Under “welcome to our site” add a small rectangle fill with a dark shade of blue/grey.

Now take abit of time to add a brief description of your website.

Now select the color white and select a grunge brush, add abit of grunge into your header on the right side.

Add your text for your other 2 sections and add a third section at the bottom labeled “featured work”.

Now select a couple of pictures of your choice for your work and recent entry.

Now were going add abit of shading to our header and navigation, starting with the navigation, select the color white and the rectangle marquee tool. Draw a rectangle across half of the navigation and fill with white.

With your white box layer selected, hold ctrl and click on your navigation, now goto “select > inverse” then hit the delete key on the keyboard. you should be left with this.

Now add a layer mask and select a reflected gradient, drag the gradient over the left side from the middle so both the left side and right side smooth into the box. do the same with the header. you should have something like this.

Car Wallpaper Tutorial

Create a new document what ever size your wallpaper will be, for the purpose of this tutorial i shall be using a non wallpaper size of 600×440. Select the gradient tool and fill the background with the colors #8b9fa7 & #cee4e9.

Open up your picture of the car you want to use, i shall be using the picture below.

Once open drag your image over to your canvas and resize to the size you want to use.

Select your desired cutting tool and remove the background, ive also kept the shadow underneath the car to save time adding it later.

Once cut out duplicate your car layer then goto “filter > blur > guassian blur” blur by 3pixels then set the layer opacity to 35%. you should have something like this.

Now duplicate your car layer again and drag the layer underneath everything eles but above your background layer. Then goto “edit > transform > flip vertical” place your car under your origain like this.

Now add a layer mask and blend it in abit.

Add your desired text.

Now select the paint brush tool and goto your brush options, you should see a little black arrow click this to rollout another menu and select “assorted brushes” Then select the “crosshatch” brush and add a few sparkles to your image.


Knight Rider Wallpaper Tutorial

Open up your image of the car you want to transform into your knight rider wallpaper, i shall be using this picture of the audi rs8.

Firstly lets remove the number plate, select the polygonal lasso tool and make a selection like this.

Copy and paste the selection to a new layer and move it up over the number plate, you may need to duplicate it more than once to cover it. You should then have something like this.

Merge the new grill with the main image so you left with one layer. Duplicate your main image then goto “filter > stylize > glowing edges” use these settings,


Also set the layer blending mode to “Linear Dodge” and press “ctrl + u” and colorize the image red. You should have something like this.

Duplicate your main image again but drag it to the top so its on top of everything in the layers window so far. Set layer blending mode to “Linear Burn” and opacity t0 30%, then goto “filter > blur > guassian blur” blur by 2 pixels. You should be left with this.

Now create a new layer above the rest, select the colors #e49d3e and #8b5521 and goto “filter > render > clouds”. Now select the rubber and remove the clouds from the main detail of the picture.

Now set the layer opacity to 60% and blending mode the “color dodge” you should have something like this.

Now zoom in on the grill and create a couple of red squares.

Add an outerglow using the settings below.

Create 3 cirlces using the color #f8f9d7 and place them in the middle of the grill. Also guassian blur them by 2pixels.

Now select the paint brush tool, then select the assorted brushes, then select the crosshatch brush.

Add 3 crosshatchs on your 3 circles. Your image should now look like this.

Now add some text to your image.

Now select the rectangular marquee tool and create some squares like this.

When your done merge all your squares as one then click your layer whilst hold the CTRL key on the keyboard to make a selection. Select a light red color and a dark red color as your background and forground and drag a gradient over your squares (Or just add a gradient overlay).

Now add a outerglow & stroke using these settings.

You should have something similar to this.

Add a layer mask to your squares and set opacity to 50% and your done.

Compass Tutorial

Create a new document 500×400 with any desired background. Select the elliptical marquee tool and draw a circle, fill the circle with a temporary color. In the layers window click on your layer whilst holding the “CTRL” key on the keyboard to load a selection, now goto “select > modify > contract”. when the box comes up enter a value of around 20-30 pixels. Now goto “select > modify > smooth” and enter a value of 20. You should now have a ring like this.

Now add these layer styles to your ring.

You should have something like this.

Now create a shape like this.

All done with the elliptical marquee tool using to shapes, merge both shapes together on one layer and place behind your ring.

Right-Click your ring layer and goto “copy layer styles” then right-click your shape you just made and goto “paste layer styles” you should have something like this.

Using the same concept as the 1st step create another ring, only this time make it smaller to fit inside the first one we made.

Now add these layer styles.

You should have something like this.

Now create another circle big enough to fill whats left inside. Add these layer styles.

You should have something like this.

Add your letters N, E, S and W.

Add your lines that go around the compass, to do this we create a circle from the custom shapes menu, then select the type tool and use type on a path. Ive already written a tutorial about type text along a path check that out for more detail.

Select the pen tool and create a shape like this.

Fill the shape with the color white and set opacity to 25%.

Now goto the custom shapes tool within photoshop and select a custom shape same as the image below. Stretch it out to fit the inside of the compass also set layer opacity to 50%.

Now add your little arrows which are also shapes from the custom shapes menu, just fill each side of the shape a darker shade of the main color.

Passport Photos Tutorial

In this tutorial im going to show you how to make your own passport photos, OR you could save time and spend £4-£10 getting one done in a naff photo booth.! Couple of advantaged of doing it yourself,

1) Cheaper
2) You can take unlimited amount of pictures of your self
3) You can see the result almost instantly

Firstly in this tutorial i shall not be using a picture of myself 😛 im going to be using an image of a celebrity 🙂

Let’s set about cropping and re-sizing. The required size for a UK passport is exactly W 35mm x H 45mm. (other countries maybe different). Select the crop tool and enter the correct sizes on the Options Bar and enter a resolution of 300 pixels/inch.

Place the crop tool on the image and drag out a cropping marquee to mark the required area. Your crop stays proportional, no matter how large or small your marquee is, the image will always be 35 x 45 mm at 300 dpi. Photoshop will resample the image via the crop tool, so you don’t need to go to Image > Image size to make any alterations. Double click or press Enter to make the crop.

Image after crop has been okayed.

Now for a passport photo to be valid were going to need a white background, so select your prefered cutting tool I.E pen tool or polygonal lasso tool & begin to cut around your shoulders/head & remove the background. (if your image is already on a white background skip this part)

You should be left with something like above. Create a new layer underneath your image and fill it with the color white, then press CTRL + E to merge the layers together.

Okay now goto “file > new” and create a new document with the following settings.

To make our pictures easier to cut out fill the background on your new document with a light grey color. Now drag your portrait from your old document to your new document.

Close your old document and maximize your new document. Now whilst holding the ALT key on the keyboard drag your image to the side. The alt key will duplicate it for you whilst your moving it, do this 4 times.

You only need to 2 pictures for a valid passport but you can use the other to for???…………..

Print your picture using a photo-realistic printer with premium quality gloss paper (no heavier than 180 gsm) – 6 x 4  Photo Paper is ideal. Most printers today (Canon & Epson) guarantee the image for at least 10 years but will last well past the passport’s expiry date. Finally, use a sharp scalpel and steel ruler to trim your pictures (or scissors)

Remember, don’t alter the image in any way, if there is a scar on your chin or lines under your eyes then they must be in the picture too. If you really do look awful in your picture (and don’t we all) then consider having holidays at home.

Important Notice: for UK passports only

The rules for submitting photographs are very strict.  Full details can be found in Information Leaflet IL/02/03 and read Note 12 – Photographs. This leaflet is available from your Post Office or Passport Office.

Simple Page Curl Tutorial

Open up the image you want to add a page curl to, im going to use my car blueprint from a tutorial i recently created.

Duplicate your image layer and add a 2 pixel stroke.

Now goto “layer > merge visable”, your layers should now have gone into one, duplicate your image layer again and goto “edit > transform > warp”, you should then be presented with this.

Take the very bottom right anchor point and drag towards the middle of your image.

Press the enter key on the keyboard once your done. (you might want to have a play with the warp tool as it is a pretty neat tool)

Now add a simple drop shadow to your image layer.

Blueprints Tutorial

1st before we start we need to create our grid pattern, create a new document with a transparent background with the size 45 x 45, select the pencil tool and a 1 pixel size brush and the color black. Now make a 2 pixel line then miss 1 pixel out then make another 2 pixel line
and so on.

Once you have something like above goto “edit > define pattern” and give it a name of your choice.

Right thats that out the way. Open up your image you want to turn into a blue print, im going to use a picture of a car for this example but houses and other objects work fine also.

Once you have your image loaded up goto “image > adjustments > desaturate” your image should then go grey, then goto “filter distort > find edges”, you should have something like this.

Now theres abit too much of detail for my likeing so press “ctrl + L” to adjust the levels. Move the “black”, “grey” & “white” markers/sliders to your liking have a good play about with them, once your happy press okay, heres mine.

Now goto “image > adjustments > invert” this will replace the colors to the opposite, (white will be black, black will be white.)

Create a new layer above your image and fill it with the color (#0054a5) then set the layer mode to “linear dodge” your image should now look like this.

Create a new layer and select the paint bucket tool, at the top of the menu switch from forground to pattern.

From the patterns menu select your pattern.

Fill the layer with your pattern, set opacity of the layer to about 30% and the blend mode to overlay.

Now useing the arrows from the customshapes menu and the type tool add some blueprint elements to the canvas.

You can be creative as much as you like, to adjust the perspective of your arrows and text goto “edit > transform > distort” use the lines on your image as a guide to how they look. Thats pretty much it, the more lines and numbers you add the more better it will look, you could even add a few other items.